Mono Pump - List of Manufacturers, Suppliers, Companies and Products

Mono Pump Product List

1～8 item / All 8 items

Displayed results
Pumping from water-like liquids to high-viscosity liquids without pulsation and in a precise manner! Mono pump.

Pumping from water-like liquids to high-viscosity liquids without pulsation and in a precise manner! Mono pump.

A pump that addresses difficult-to-transfer liquids such as high-viscosity, high-concentration liquids, liquids containing solid substances, and powders, solving various challenges.

<Features> ● Capable of transferring liquids from low viscosity to high viscosity and high concentration, slurries, gas-containing liquids, and powders ● The flow during transfer is constant at all moments, with no pulsation ● Wide flow control is easy through control of rotational speed ● Does not alter, mix, or damage the transferred liquid ● Accommodates a wide range from small to large volumes, low to high pressures, and from acids to alkalis ● Does not release dust, noise, or unpleasant odors to the outside <Specifications> ● Discharge rate: 0.024µL/s to 300㎥ (cubic meters)/h ● Discharge pressure: up to 7.2MPa *Varies depending on the liquid and conditions.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sodium hypochlorite and other chemicals are injected in a non-pulsating, metered manner! Chemical dosing mono pump.

Sodium hypochlorite and other chemicals are injected in a non-pulsating, metered manner! Chemical dosing mono pump.

Magnetic coupling type that allows precise injection without liquid leakage for sodium hypochlorite, PAC, caustic soda, concentrated sulfuric acid, and more!

For the injection of sodium hypochlorite, PAC, caustic soda, concentrated sulfuric acid, etc., with <non-pulsating> <quantitative> injection and <wide-range> flow control! Using a magnet coupling type with no liquid leakage, it accurately injects chemicals from small to large volumes. Since the liquid is transported with bubbles, there is no gas lock. Due to the wide flow control range of a single unit, there is no need to use multiple pumps even if the injection amount increases or decreases, and control linked with a flow meter can be easily performed. ○ No gas lock occurs. ○ Flow control of up to 1:100 is possible. ○ There are no shaft seals, and there is no liquid leakage. ○ Usable with sodium hypochlorite concentrations from 1% to 12%. ○ The structure is designed to minimize injection issues caused by scaling. ○ Improved maintenance and extended lifespan have been achieved. ○ A type that allows easy press-fitting into the line is also available.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Monopump Catalog for the Battery and Functional Materials Industry

Monopump Catalog for the Battery and Functional Materials Industry

Active in the manufacturing processes of lithium-ion secondary batteries and functional films! Excellent maintenance properties, transferring and supplying liquid materials without pulsation.

The "Mono Pump" is a rotary positive displacement single-screw pump that can transfer various liquids in a non-pulsating and precise manner. By simply adjusting the motor's rotational speed, the discharge volume can be controlled. Additionally, it has a low number of components, allowing for quick daily maintenance, contributing to improved work efficiency. In this catalog, we introduce the Mono Pump, which supplies electrode slurries and functional materials with high precision in the manufacturing processes of lithium-ion secondary batteries and functional films. [Featured Products] ■ Standard Model: "NHL-F Type" ■ Small Capacity Model: "2NL-F Type" ■ Shaft Seal-less, Hopper Integrated: "NVL Type" ■ Shaft Seal-less, Direct Tank Connection: "NTC Type" *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Supply liquid in minute amounts × precise quantities! Mono Pump Micro-Liter Series

Supply liquid in minute amounts × precise quantities! Mono Pump Micro-Liter Series

Achieving micro-quantity × continuous quantitative injection for research and development purposes! A pump for micro-quantities compatible with slurries.

The "Monopump Microliter Series" is a high-performance pump that enables continuous precise injection of minute amounts, making it ideal for supplying coating machines that require strict discharge accuracy, as well as for research and development applications. It can quantitatively discharge liquids containing solid components without changing their properties, and its simple structure with fewer parts allows for easy disassembly and cleaning. Additionally, since the discharge amount per hour is proportional to the rotational speed, the discharge amount can be easily set and changed simply by controlling the motor. We also offer a shaft-sealed type that accommodates the injection of high-viscosity liquids and connection to existing tanks. 【Features】 ■ Pulsation-free, precise injection ■ Compatible with slurries ■ Reduces maintenance effort ■ Easy adjustment of injection volume *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transfer and supply of slurry and chemicals! Mono pumps for water treatment facilities and water purification plants.

Transfer and supply of slurry and chemicals! Mono pumps for water treatment facilities and water purification plants.

Wide-ranging activities in the environmental field, such as the transfer and injection of sludge, chemicals, dewatered cakes, and powders, as well as pumping.

Challenges in the transport, injection, and supply of liquids generated at various treatment facilities such as wastewater treatment plants, sewage treatment plants, agricultural community drainage treatment facilities, water purification plants, industrial wastewater treatment facilities, and waste disposal sites. Mono pumps, capable of pulsation-free and precise transport of high-concentration slurries and chemicals, address these challenges and contribute to the environmental sector. 【Main Features】 ◆ Sludge Pumps - Stable extraction and precise supply of high-concentration sludge. - Almost unaffected by changes in liquid level or sludge concentration on the suction side. - Strong suction power allows for easy extraction from concentration tanks. ◆ Chemical Pumps - No agitation or shearing, enabling precise supply and injection of chemicals without damage. - Pulsation-free and precise, allowing for easy proportional supply of sludge and dewatering aids. ◆ Dewatering Cake Pumping Devices - Continuous flow with pulsation-free and precise delivery contributes to stable and efficient operation of incinerators and drying furnaces. - Capable of transporting dewatering cakes with a moisture content of 65-80% or higher, which have poor fluidity. ◆ Pumps for Powdered Activated Carbon and Powdered Quicklime - High concentration and continuous transport with minimal air pressure. - No need for large-scale solid-gas separation equipment at the transport destination.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-precision supply of coating liquid to the coater! Coating mono pump

High-precision supply of coating liquid to the coater! Coating mono pump

The coating mono pump is suitable for coating processes that require precise discharge accuracy.

The coating mono pump is a pump developed for the precise supply of coating liquid to coaters in the manufacturing processes of functional films and lithium-ion secondary batteries. It accommodates a variety of liquids, from low-viscosity solvent-containing liquids to electrode slurries. Accurate liquid supply contributes to improved product quality. ■ Accurate and precise dispensing The mono pump, which is an excellent single-screw eccentric pump for metering, is equipped with a dedicated device that suppresses minute pressure fluctuations, achieving even higher precision in dispensing. ■ Excellent wear resistance materials Durable materials are available to match the transferred liquids. ■ Easy disassembly and cleaning With fewer parts, maintenance can be performed in a short time. ■ Reduction of material loss By adopting a slim casing, the internal volume is reduced by about 30%, contributing to the reduction of material loss. [Examples of applications] High-performance films, lithium-ion secondary batteries, all-solid-state batteries, fuel cells, multilayer ceramic capacitors, heat dissipation sheets, etc. For more details, please refer to the related links.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Few parts, easy disassembly and cleaning! Sanitary specification mono pump.

Few parts, easy disassembly and cleaning! Sanitary specification mono pump.

The Mono pump has become easier to disassemble than ever before, making cleaning and maintenance simple! It accommodates a wide range of liquids, from watery fluids to high-viscosity liquids!

Significantly reduce the number of parts! The "Mono Pump Hygienic Series," which is easy to disassemble and simplifies cleaning and maintenance, is a sanitary pump suitable for the food and chemical industries. -------[Examples of Transferred Liquids]-------- Food: Condensed milk, honey, milk, jam, yogurt, concentrated fruit juice, mayonnaise, ketchup, beverages Chemicals: Emulsions, inks, adhesives Cosmetics: Creams, lotions, shampoos, lipsticks, surfactants, polymers Electronics: Positive and negative electrode materials for secondary batteries, electrolytes Pulp and Paper: Coating colors, pulp, dyes, adhesives, calcium carbonate, talc -------------------------- Not only can it transfer liquid substances, but it can also handle high-viscosity liquids, high-concentration liquids, liquids containing solids, liquids with bubbles, and low-flow liquids without damage, allowing for precise transfer! We offer various models tailored to your needs, including compact models, vertical types, and hopper-integrated types. --------------------------- *For more details, please request documentation or view the PDF data from the download.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
For liquid supply in secondary battery manufacturing processes! Mono pumps for the battery manufacturing industry.

For liquid supply in secondary battery manufacturing processes! Mono pumps for the battery manufacturing industry.

Excellent abrasion resistance and solvent resistance, allowing for high-precision transfer and supply of electrode materials and solvent-containing liquids! Suitable for dispersion, filtration, vacuum degassing, and coating applications.

Active in various manufacturing processes such as lithium-ion secondary batteries, fuel cells, and all-solid-state batteries! Mono pumps are introduced for the transfer of high-viscosity liquids and high-concentration slurries, such as positive and negative electrode materials, as well as for the supply of coating liquids to coaters in precision thin film coating applications. They contribute to improving productivity on-site with excellent wear resistance and high maintainability. [Features] ◆ Achieves long life with components that excel in wear resistance and solvent resistance. ◆ Adopts a new slim casing that reduces the internal volume by about 30%. ◆ Simple structure with fewer parts, allowing for easy disassembly and cleaning in a short time. [Typical battery manufacturing processes where mono pumps excel] ◆ Dispersion process: Quantitative supply of liquid materials to the disperser without pulsation. ◆ Vacuum degassing process: Strong suction under high vacuum conditions for quantitative transfer. ◆ Filtration process: Stable supply of high-viscosity liquids to the filter. ◆ Transfer process: Stable transfer to the next process tank. ◆ Coating process: Quantitative supply to precision thin film coating machines without pulsation.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Mono Pump

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.